[Amps] Stripline design

[Carl]

QST and HRM had some theory/construction articles mostly by Eimac engineers.

Ive done some stripline myself but prefer a single 3CX1000A7 and 8877 which 
I use on 144 and 222.  I remember a dual 4CX1000A article for 2M that worked 
well.

These days the only 2 x 3CX800 design Im aware of is K1FO's Lunar Link 
products.

Carl
KM1H


----- Original Message ----- 
From: "Roger" <sub1 at rogerhalstead.com>
Cc: <amps at contesting.com>
Sent: Sunday, November 15, 2009 10:04 PM
Subject: [Amps] Stripline design


> I'm looking at building a 2-meter amp using a stripline with a pair of
> 3-CX800's or 4CX-800's, but I've not found any real data on the design
> (dimensions) of the actual strip line.  Another possibility is building
> the 6 'n 2 amp in the ARRL classic amp design handbook. I also have a
> Henry 2002A using a single 3CX-800 with a strip line.
>
> Unlike using the tube characteristics and designing a standard Pi or
> Pi-L network for a given Q, I've found no information on strip lines in
> any of the hand books.  Yes, there were a couple of amps using one and
> the dimensions were given, but if the design information was there I
> missed it.
>
> The only thing I found on the net were the download sites that appear
> free until you give them your information and then they want you to
> pay.  I'd probably sign up if they told me the charges up front.
>
> 73
>
> Roger (K8RI)
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps