[Amps] placement of RF choke bypass cap.

[Ken]

>> 1.) Start with a #10 or #12 self supporting copper wire dipole that is 
>> about 10" each side of the center (Fres ~ 280MHz)
>> 2.) I will solder a 2" dia. thin copper disk to each element at the 1/3 
>> point out from the center on each side and remeasure Fres.
>> 3.) Then I will move the disks to the 2/3 point from the center and 
>> remeasure Fres.

>Snip<

I'm looking forward to seeing the results of this one !!!