[Amps] 8877 won't load on 80M

[Bill Turner]

ORIGINAL MESSAGE: 
On Mon, 28 Jan 2013 13:33:50 -0800 (PST), NY1E wrote:

>
>I don't have a signal source outside the bands, but with an antenna analyzer connected to the output and a 2300 ohm resister from plate to ground, it will tune to 1.2:1 SWR on on the analyzer set to 3750. Is that the same test?

REPLY: 
It is a little suspicious that the SWR will only go down to 1.2:1. It
should easily go to a perfect 1:1. Something's not right. 

Bill, W6WRT