[Amps] Advice needed for SS amp

[Paul Christensen]

It might be helpful to look at the AMPS archives from one years ago. 
Specifically, look at May 1, 2012 for a discussion about water and 
vapor-phase cooling of solid-state devices.

Paul, W9AC

> --- On Thu, 6/6/13, peter chadwick <g8on at fsmail.net> wrote:
>
>> I believe that at one time, there was
>> a US mil airborne HF Tx that used a 4CX350 with the whole PA
>> compartment liquid cooled with a relatively inert silicone
>> oil fluid. Although not quite as good as water, this is a
>> possible approach, although I wouldn't know where to get a
>> suitable oil.
>>
>> 73
>>
>> Peter G3RZP
>
>
>>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps