[Amps] MLA-2500 Tube Conversion
N4zed
n4zed at comcast.net
Fri Oct 22 02:18:13 EDT 2021
Got my Phillips head at Ace Hardware.
Ken
N4zed
-----Original Message-----
From: Amps <amps-bounces at contesting.com> On Behalf Of Robert W5AJ
Sent: Wednesday, October 13, 2021 3:49 AM
To: amps at contesting.com
Subject: Re: [Amps] MLA-2500 Tube Conversion
Screw #6-32
Searched for Philips or Hex (ALLEN) head at one local hardware store, All too Long
Quit driving around and checked other two hardware stores via internet and didn’t look Hopeful
https://smile.amazon.com/gp/product/B000FN1OD4
#6-32 ¼” long internal hex
Hopefully head is large enough to match up
Will post update after delivery
73 W5AJ
PS: On the other side (far side) story that got going! Have a box marked Allen wrenches
https://en.wikipedia.org/wiki/Allen_(brand)
When I go to the store and buy Hex wrenches, they go in the Allen Wrench box at home
https://en.wikipedia.org/wiki/Allen_(brand)#/media/File:Folding_Allen_key_set.jpg
From: Robert W5AJ [mailto:woodr90 at gmail.com]
Sent: Monday, October 11, 2021 7:03 PM
To: N4zed <n4zed at comcast.net>
Cc: Amps group <Amps at contesting.com>
Subject: Re: [Amps] MLA-2500 Tube Conversion
Additionally
Anyone located a supplier for the allen wrench head screws used to hold covers on??
Robert
On Sun, Oct 10, 2021, 10:01 AM N4zed <n4zed at comcast.net <mailto:n4zed at comcast.net> > wrote:
Has anyone here attempted the tube conversion for the Dentron MLA-2500 from the 8875 tube to the 3CX800A7?
I have the instructions laid out by LX2KL and I have a filament transformer for the tubes.
Thanks
N4zed
--
This email has been checked for viruses by AVG.
https://www.avg.com
_______________________________________________
Amps mailing list
Amps at contesting.com <mailto:Amps at contesting.com> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
--
This email has been checked for viruses by AVG.
https://www.avg.com
More information about the Amps
mailing list