[CQ-Contest] 419 ICE filter and 200W

[Rich Hallman - N7TR]

Last year I sent 3 ICE419's back to ICE and they updated the filter
units to their latest spec (200w) and sent back within a few weeks.  

Without charge!

73 Rich N7TR

-----Original Message-----
From: cq-contest-bounces at contesting.com
[mailto:cq-contest-bounces at contesting.com] On Behalf Of Dick Frey - K4XU
Sent: Sunday, March 18, 2007 1:06 PM
To: CQ-Contest at contesting.com
Subject: Re: [CQ-Contest] 419 ICE filter and 200W

Steve,
Just making a heavier coil will not cut it. The fundamental limitation 
is the RF current carrying ability of the mica caps. These are what fail

even at 100W. The filters could be modified for 200W by replacing the 
present caps with two of half the value in parallel.
One could not undertake such a modification without the equipment needed

to check and align them when you're done. I'd use ATC 100C series caps, 
but they are expensive and hard to get. Micas are reasonably low loss, 
cheap and much easier to find.
Given the technical limitations of the average user, it would be best if

ICE designed the filters for 200W from the start.
Dr. RF

-- 

____________________________________________
Richard Frey - K4XU
61255 Ferguson Rd. 
Bend, OR  97702
Email:  k4xu at arrl.net
Web page: www.codxc.org

_______________________________________________
CQ-Contest mailing list
CQ-Contest at contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest