[CQ-Contest] DX Doubler and cabling with FT5000/3000?

[Pete Smith N4ZR]

I believe that the SO2RXLAT now supports the OTRSP protocol.

73, Pete N4ZR
Download the new N1MM Logger+ at
<http://N1MM.hamdocs.com>. Check
out the Reverse Beacon Network at
<http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.

On 10/17/2016 1:36 PM, David Pruett wrote:
> I have a DXDoubler with a PIEXX SO2RXLAT and it works perfectly.   The 
> only thing necessary is that your logging software must support the 
> MicroHam SO2R protocols over USB to control the SO2RXLAT (which then 
> controls the DXDoubler).
>
> On 10/17/2016 12:24 PM, Kelly Taylor wrote:
>> If you have the DXD working with a computer and a Yaesu radio now, it 
>> should work fine as is: I’m relatively confident Yaesu has been 
>> consistent with the microphone pin-outs.
>>
>> But if your computer, as with many modern computers, lacks an LPT 
>> port, you’ll need an LPT emulator such as the SO2Rxlat from Piexx. 
>> It’s a USB to LPT translator.
>>
>> Top Ten specifies the SO2Rxlat as a suitable interface.
>>
>> 73, kelly, ve4xt,
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest at contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest