[CQ-Contest] Multi 2 locking device?
Kostas SV1DPI
sv1dpi at otenet.gr
Fri Jan 6 01:22:23 EST 2017
Also there no LP category. Only HP, so M2 is not a wise decision.
I know 3 devices:
1) 4o3a
http://www.4o3a.com/index.php/products/station-automation/lock-x/
and for inband use
http://www.4o3a.com/index.php/products/antenna-switchers/1-amp-2-radio-switch/
2) ea4tx
http://ea4tx.com/en/ea4tx-interlock/
3) Acom
http://www.acom-bg.com/products/xcvr-commutator/acom-2s1-automatic-xcvr-commutator
Acom and 2nd 4o3a are for inband use. With Acom you can share the same
antenna, with 4o3a you need 2 antennas (better but you need one more ant).
...73 de Kostas SV1DPI
(One of SZ1A-EP6T)
On 5/1/2017 8:34 μμ, Jukka Klemola wrote:
> Oh .. and about operating on the same band..
> You use LP.
> If you have separate antennas for each radio, you should have no problems.
>
> If you want to share the antennas, I do not know of any commercial products
> for the use you describe.
>
>
> 73,
> Jukka OH6LI
>
>
> 2017-01-05 20:31 GMT+02:00 Jukka Klemola <jpklemola at gmail.com>:
>
>> For M2, you do not need a PTT interlocking device if you use two radios.
>>
>> If you use two radios per band, then you need a PTT interlock for those
>> two radios on each band.
>> If you use a third radio for 3rd band multipliers, you need an interlock.
>> This 3rd band interlock can be complex, depending on how you want to
>> operate.
>>
>> But, for a M2 station with just two radios, one for a band at a time, you
>> do not need an interlock.
>>
>>
>> 73,
>> Jukka OH6LI
>>
>>
>>
>> 2017-01-05 20:03 GMT+02:00 Fco. Luis Delgadillo <xe2b at outlook.com>:
>>
>>> Hola,
>>>
>>> I'm planning to operate M2 LP, the oncoming contest season.
>>> I do have two WX0B passbands filters from my previous SO2R setup.
>>>
>>> -Only two radios will be used.
>>> and
>>> - Very simple antennas setup on a city lot:
>>> Log periodic Cushcraft ASL-2020
>>> Vertical tribander Force13 VR-3
>>> Twin Slopper Alpha-delta DX-A
>>>
>>> Is there any summary related to options available for locking devices to
>>> prevent two radios to operate in the same band? I do not want to have
>>> burned front ends.
>>> Preferably, I would like to build it.
>>>
>>> I appreciate the feedback
>>>
>>> 73
>>>
>>> Luis XE2B
>>>
>>>
>>> Enviado desde mi Huawei de Telcel
>>> _______________________________________________
>>> CQ-Contest mailing list
>>> CQ-Contest at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/cq-contest
>>>
>>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest at contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
More information about the CQ-Contest
mailing list