[ct-user] Help needed -- FT-1000MP to CT

[Jim Reisert AD1C]

As has been said here many times before, CT controls the baud rate, not
the TSR.  There is never a need to specify -b4800 (or -b<anything>).

But that is not related to your problem.

On Sun, 11 Mar 2001 17:54:26 -1000, gyantis@midtec.com wrote:

>4.  I've used the usual COMTSR of COMTSR1 -P1 -B4800 -N82.  It loads
>correctly.  I brought over and used my laptop (and cable) since I KNOW it
>works fine with CT and the serial port is COM 1.

--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert@alum.mit.edu>, http://www.ad1c.com



--
WWW:                      http://www.k1ea.com/
Submissions:              ct-user@contesting.com
Administrative requests:  ct-user-REQUEST@contesting.com
Problems:                 owner-ct-user@contesting.com