[ct-user] Networking CTWin & CT DOS

[David Robbins]

If you are just trying to use ctwin to pass spots to the dos network you
can use my free wintelnetx program instead.  It will connect to one or
more telnet clusters, merge and dupe the spots, and then feed them
directly to the ct Ethernet network.  It is a 2-way connection.  

I'm not sure why ctwin and dos ct won't talk, if I get a chance I'll set
up a test here to see if I can tell... that is if ken doesn't answer
first.


David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://www.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
 

> -----Original Message-----
> From: ct-user-admin@contesting.com
[mailto:ct-user-admin@contesting.com]
> On Behalf Of Ari Hyvonen
> Sent: Monday, October 07, 2002 16:15
> To: CT-User@contesting.com
> Subject: [ct-user] Networking CTWin & CT DOS
> 
> Hello,
> 
> We have tried to connect ctwin & dos version using ethernet. Plan is
to
> connect win pc to the internet and pass spots to ct network using
dxtelnet
> &
> ctwin on the 'gateway' pc. So far connection works only one way, so
that
> dos
> version talks to the windows version but not the other way.
> 
> DOS version is started with nettsr:
> nettsr 10.0.0.4 100 255.255.255.0 3030
> 	(3030 seems to be the port that ctwin uses)
> 
> Windows version is started with the -ENET switch. (win98se)
> 
> Tested also with the latest 9.81 versions.
> Network works fine between dos versions and also between windows
versions.
> 
> Any ideas?
> 
> 
> Regards,
> Ari OH6LNI
> 
> 
> _______________________________________________
> CT-User mailing list
> CT-User@contesting.com
> CT-User-request@contesting.com Subject=unsubscribe to unsubscribe
> http://lists.contesting.com/mailman/listinfo/ct-user