[RTTY] Help!!!

[Bill Turner]

On Fri, 23 Aug 2002 00:34:11 +0100, Tom Osborne wrote:

>Now I'm stumped and don't know what else to check.  Think it may
>be a current problem?  If so, why does the voltage not change?? 
>Any ideas?  73

_________________________________________________________

It may be the voltage is changing but at a rapid rate, too fast
to be seen with a voltmeter.  Put a scope on the output and see
if there are spikes or dropouts appearing when you increase
power.  If so, the regulator circuit may be at fault.

Bill, W7TI