[RTTY] TX9 -Reversed I'm confused

[Miro Cadez]

Hello ,
 worked TX9 some 30 minutes ago, hi transmited reverse tones, I tried with
normal tones (FSK normal) on my TX and he came  back to me soon.
That's how I didn't worked last ZK3 RTTY expedition, they were transmited in
reverse, and received also in reverse and before
finding out his way of working, conditions dropped.

Checked again a minute ago, to work with TX9 on FSK, you have to listen
'Reverse' and transmit Normal FSK.

73/GL Miro S58T


----- Original Message -----
From: <W0YR at aol.com>
To: <ku4j at hiwaay.net>; <RTTY at CONTESTING.COM>
Sent: Friday, October 15, 2004 3:31 PM
Subject: Re: [RTTY] TX9 -Reversed I'm confused


> Hi!
>
> You need to flip the RTTY TONE  Norm/Rev switch on your FT-990.
Otherwise,
> you will never get this situation resolved.
>
> 1.  Read your FT-990 instruction manual.  (The page in mine that addresses
> this is p. 20, under (1) RTTY TONE.
>
> 2.  Open the small Top Access Panel.
>
> 3.  Look in the upper right hand corder and you will see the RTTY Tone
> switch.  Switch it to the OPPOSITE setting that it is now.
>
> This should solve your problem.
>
> Of course, run tests with other stations whom you KNOW are properly
> configured.
>
> Hope this helps.
>
> 73
>
> Mike
> W0YR/4
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>