[RTTY] extfsk & omni6

[Bill Rogers W3UL]

You didn't mention what software and/or hardware you are using.  Are you 
able to read RTTY with your setup?
I use MMTTY software, a Rigblaster Pro, and an Omni VI+.

At first I was able to copy RTTY with no difficulty, but each time I 
answered a CQ I was told I was "upside down".  The  Omni VI+ doesn't have a 
way to change this.  The MMTTY software can change the inversion thing but 
then it's "upside down" during receive!   I ended up building a simple one 
transistor circuit to invert the FSK signal coming out of my Rigblaster and 
things have been OK since then.  Let me know if you want to see the circuit.

73, Bill / W3UL



----- Original Message ----- 
From: "Ed" <w3nr at comcast.net>
To: "RTTY" <RTTY at contesting.com>
Sent: Tuesday, February 27, 2007 8:06 PM
Subject: [RTTY] extfsk & omni6


> Anyone care to share the correct settings to use extfsk with the omni ?
> I have it installed, called cq more than I care...no joy. Evidently I
> have something,somewhere, set wrong. Any one care to help
>
> Ed W3NR
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>