[RTTY] Rigblaster Plus & Windows 10

[Alan]

My Rigblaster Pro is plugged into an add-on com port board from a 
previous computer.  Windows 10 id'ed the board and my com port is 2.

No driver was needed.  No problems.

Alan
WD9GMK

On 5/24/2016 7:55 PM, Al Kozakiewicz wrote:
> The Rigblasters themselves are just interfaces, no driver is needed.
>
> I'm pretty sure the CD that comes with the product just has a collection of digital ham shareware, the documentation and the drivers for the included USB-Serial cable if that is required. If there is a problem that's likely to be the source.  I have no idea if they use the Prolific or FTDI chipset. The Prolific is a headache if you don't find the right driver - most of the ones freely available are crap. But in either case I'd bet dollars for donuts that the USB driver supplied doesn't support Windows 10.
>
> If all else fails you can always just purchase another USB-Serial cable with a driver that works under Windows 10.
>
> Al
> AB2ZY
>
> -----Original Message-----
> From: RTTY [mailto:rtty-bounces at contesting.com] On Behalf Of Don Hill AA5AU
> Sent: Tuesday, May 24, 2016 4:35 PM
> To: rtty at contesting.com
> Subject: [RTTY] Rigblaster Plus & Windows 10
>
> Had someone who owns a Rigblaster Plus contact me to say they are having trouble getting Windows 10 to recognize the Rigblaster.
>
> Anyone using this combination and let me know what driver they used.
>
> Thanks,
> Don AA5AU
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>