[SCCC] Copper Paste

[Timothy Coker]

Noalox from Lowes is what I have been using. It's meant for aluminum joints.
$9 for 4oz or so.

73,

Tim / N6WIN.

On Sat, Jun 11, 2011 at 7:38 PM, Dennis Younker NE6I <ne6i at cox.net> wrote:

> Hmmm. We know aluminum to aluminum causes a black corrosion in short order.
> That corrosion is an insulator.  We also know that dissimilar metals cause
> corrosion. I hadn't thought about copper to aluminum previously. In my past
> experience though, Penetrox applied to aluminum yagis was a positive
> experience. Penetrox was shipped with KLM antennas 20+ years ago. I've been
> out of touch since then.
>
> Your suggestions of products at Home Depot is intriguing.
>
>
> --Dennis, NE6I
>
> ----- Original Message -----
> From: "Dan Violette" <danki6x at earthlink.net>
> To: "'Dennis Younker NE6I'" <ne6i at cox.net>; <sccc at contesting.com>
> Sent: Saturday, June 11, 2011 7:30 PM
> Subject: Re: [SCCC] Copper Paste
>
>
> > You will get a boat load variety of answers.  Copper and aluminum are a
> > corrosion concern, but the grease part helps keep the water out so many
> > love
> > the copper containing.  Home Depot has various stuff and I have been told
> > the "Ox-Gard" (a conductive grease which I have gotten there) is the
> best.
> > I don't know the conductive material, but it is said to also bite into
> the
> > aluminum for good coverage.  These are used for aluminum wiring and are
> in
> > the electrical department.  I believe they have the material called
> > something like Aluminox too.
> >
> > Dan KI6X
> >
> > -----Original Message-----
> > From: sccc-bounces at contesting.com [mailto:sccc-bounces at contesting.com]
> On
> > Behalf Of Dennis Younker NE6I
> > Sent: Saturday, June 11, 2011 7:13 PM
> > To: sccc at contesting.com
> > Subject: [SCCC] Copper Paste
> >
> > In an attempt to improve my HOA handicapped home station, I have just
> > taken
> > delivery of a Cushcraft rotatable multiband antenna. (Geez I miss my half
> > acre QTH complete with yagis of years ago.)
> >
> > The last time I assembled an HF antenna, copper paste was included to
> > prolong the integrity of the element joints. This antenna did not come
> > with
> > this. I emailed Cushcraft about it but I am sure they will reply that
> they
> > do not feel it is necessary. Past experience tells me this is not true.
> > Aluminum joints develop corrosion and insulation between the pieces over
> > time.
> >
> > I think I have some copper paste buried somewhere, but just in case, does
> > anyone have a good source for it?
> >
> > --Dennis, NE6I
> >
> > _______________________________________________
> > SCCC mailing list
> > SCCC at contesting.com
> > http://lists.contesting.com/mailman/listinfo/sccc
> >
> > _______________________________________________
> > SCCC mailing list
> > SCCC at contesting.com
> > http://lists.contesting.com/mailman/listinfo/sccc
>
> _______________________________________________
> SCCC mailing list
> SCCC at contesting.com
> http://lists.contesting.com/mailman/listinfo/sccc
>