[SD-User] SDI
Fraser Robertson
f.g.robertson@open.ac.uk
Tue, 30 Jul 2002 09:19:38 +0100
I also had this problem twice, causing me to reboot, unfortunately both
times during a run of QSO's. In both cases it was when working non iota
stations. Not sure if it was a typo on my part or what, but I got an error
message like '.blank.. enter return or esc for non island QSO's', or
something like that, but the PC had locked up.
Paul - would it be possible to have SD modify the sdconfig.txt file on the
fly? Because following reboots in the contest, any changes I'd made to the
keyer memories were lost, which then caused me further problems/confusion
(e.g. having a #E on the end of a memory or not). I remember having this
happen to me in previous contests.
73 Fraser G4BJM
> -----Original Message-----
> From: sd-user-admin@contesting.com
> [mailto:sd-user-admin@contesting.com]On Behalf Of Jim Martin
> Sent: 29 July 2002 15:23
> To: sd-user
> Subject: [SD-User] SDI
>
>
> Another IOTA DXpedition completed with SDI software so thanks to Paul for
> making it available to us all.
> I encountered only one minor problem which was when I entered an invalid
> IOTA Ref. Under certain conditions the program locked up, the PC
> beeped and
> everything had to be switched off and on.
> This example fails all the time on both my PCs (some combinations
> work fine
> and you are told to correct the duff reference)
> call F4E serial1 Ref EUE
> I suspect most users did not make these errors but at 4.00am on a remote,
> wet and midge infested Scottish Island it is amazing the mistakes you can
> make! Having said that, it is a beautiful and tranquil piece of paradise
> (apart from the generator) and I will be back on the Summer Isles
> next year
> for IOTA 2003.
> Jim
> MM0BQI/GB5SI
>
>
> _______________________________________________
> SD-User mailing list
> SD-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user
>