[TenTec] 450 ohm Feed Line - N5BEA

[N0KHQ at aol.com]

Make sure your feed line is cut for 1/4 wave at your lowest band/frequency of 
operation.

I don't recommend using the balun in conventional tuners.......they are 
voltage type. You always want to current feed an antenna.

Spend a couple of extra bucks...order a B4-2KX...4:1 Current Balun from Radio 
Works for multiband operation. The Balun can be placed just outdoors before 
entering the house or bring it in the house within 10 to 12 feet of your 
station then RG-8 to the tuner.

Have fun and enjoy.


73
John / N0KHQ / St. Louis

Always on 18.130

Antennas:

You can build 'em better than you can buy 'em
Please visit the sites below:
http://www.hamuniverse.com/17mcoaxmox.html
http://www.cebik.com/n0khq.html
http://www.ssb-audio.com/forum/