[TenTec] Orion Aux I/O Audio Problem

[Mark Erbaugh]

Tommy,

Thanks for checking.  Did you try your test with headphones plugged in?  If
headphones aren't plugged in, I can mute the audio and the audio stays on
the Aux I/O connector.

It would be interesting to know if the problem is related to v 1.371 or just
to my Orion.

Mark

----- Original Message ----- 
From: "Tommy" <aldermant at alltel.net>
To: <tentec at contesting.com>
Sent: Friday, July 23, 2004 3:06 PM
Subject: Re: [TenTec] Orion Aux I/O Audio Problem


> Hi Mark,
>
> I have two Orions and they do not exhibit what you are seeing. I primarily
> operate CW and use TuneWin to zero beat others, I also use Pin 4 for the
> audio to my PC and would readily notice if audio went away. I just checked
> and the only time I lose audio is if I change the Audio Menu Left channel
to
> SUB. Audio is present,  at it's constant level if I drop the main audio
> level to zero and if I mute it by pressing the Main AF control.
>
> I'm switching back and forth between v1.369 and v1.372, but have not used
> v1.371 recently.
>
> Tom - W4BQF
>
> ----- Original Message -----
> From: "Mark Erbaugh" <mark at microenh.com>
> To: <tentec at contesting.com>
> Sent: Friday, July 23, 2004 11:49 AM
> Subject: [TenTec] Orion Aux I/O Audio Problem
>
>
> > I wonder if other Orion owners have encountered this problem?
> >
> > I have my computer soundcard input connected to Pin 4 of the Aux I/O
jack
> on
> > the back of the Orion. According to the documentation, this pin is Left
> Side
> > Audio Output. I have Left, Right and Speaker configured to the main
> > receiver.  With stereo headphones plugged in to the front panel
headphone
> > jack, I hear the audio in both ears as expected and the computer appears
> to
> > be receiving fixed level audio. The audio level does not change as the
> main
> > AF gain control is adjusts.
> >
> > Except - if I turn the main AF gain all the way down or mute the audio
by
> > pushing the AF gain encoder, the audio going to the computer goes away.
> If
> > I unplug the headphones and mute the audio to the speaker, the computer
> > still gets audio.
> >
> > This is with firmware 1.371.
> >
> > 73,
> > Mark
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>