[TenTec] New Orion Firmware

[Richard Detweiler]

This may be something to look at,

Try in the upate utility settings / setup to insure it is pointed to the 
right com port.

73's
Rich
K5SF


>From: "Jess Young" <w8jy at starband.net>
>Reply-To: tentec at contesting.com
>To: <tentec at contesting.com>
>Subject: RE: [TenTec] New Orion Firmware
>Date: Wed, 19 May 2004 22:13:07 -0400
>
>I have encountered an interesting problem.  My Orion was communicating
>with my logging program before I shut the program down to download the
>Firmware update.  When trying to install, the program says it cannot
>communicate with the Orion.  Tried a master reset, rebooted the
>computer, etc.  The logging program now tells me the port is already in
>use.  Still can't install the new update.  Any suggestions?
>
>Thanks,
>
>Jess, W8JY
>
>-----Original Message-----
>From: tentec-bounces at contesting.com
>[mailto:tentec-bounces at contesting.com] On Behalf Of J. Crit Harley
>Sent: Wednesday, May 19, 2004 21:44
>To: tentec at contesting.com
>Subject: [TenTec] New Orion Firmware
>
>Well, downloaded from net okay and uploaded to rig okay.
>BUT on tuning there is no difference in tuning rate whether use step 1,
>10
>or 100.  All step as if set at a step rate of 100.  No fine tuning.
>Did I miss something?
>73/Crit/K4BXN
>
>--
>Using Opera's revolutionary e-mail client: http://www.opera.com/m2/
>
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
>
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec