[TenTec] scratch pad feature in Omni VI

[Paul Gates]

You have peaked my interest... I think I will try the scratch pad on an Omni!
Pearly
Paul Gates
kd3jf at hotmail.com<mailto:kd3jf at hotmail.com>
  ----- Original Message ----- 
  From: Paul DeWitte K9OT<mailto:k9ot at mhtc.net> 
  To: tentec at contesting.com<mailto:tentec at contesting.com> 
  Sent: Sunday, November 28, 2004 1:20 AM
  Subject: [TenTec] scratch pad feature in Omni VI


  I have never used the memory or scratch pad features in my Omni VI+. Tonight I decided to try out the scratch pad.
  I stored a frequency in the scratch pad and then moved to a different frequency. I pushed  m>vfo and brought up the frequency that I stored. Up to now all is well and good.
  Lets assume that the frequency in the scratch pad is a DX station that I want to monitor and try to get when the time is right. The frequency that I moved to is one that I am calling CQ. So when I go to the scratch pad freq I want to return to my CQ frequency. 
  Other than turning the VFO to get back to the CQ frequency,  I have not figured out how to return.  Is there something that I am missing here?
  If there is not a quick return path, this is totally useless.
  Does anyone use this fearure?  I know that I can do this using VFO A and VFO B but that should not  have to be the way to do it.

  Thanks 73 Paul K9OT
  _______________________________________________
  TenTec mailing list
  TenTec at contesting.com<mailto:TenTec at contesting.com>
  http://lists.contesting.com/mailman/listinfo/tentec<http://lists.contesting.com/mailman/listinfo/tentec>