[TenTec] Corsair II & Omni V Filters
Kevin Purcell
kevinpurcell at pobox.com
Mon Nov 26 18:03:06 EST 2007
Gary:
The TenTec Wiki is the best place for this ... all the info in one
table (including the stock code for when the filter has no other
markings!).
<http://tentecwiki.org/doku.php?id=filters>
You can see the Models 282, 285 and 288 are 6.3MHz filters.
The Model 216 through 221 are the 9MHz
INRAD are also a good source of info (they make filters) for which IF
is which:
<http://www.qth.com/inrad/tentec_menu.htm>
The Cosair II will only accept extra 6.3MHz filters.
The Omni V can use both 9MHz and 6.3MHz filters.
The other Omni V users here can recommend the optimal setup (though I
suspect that would be matching 9MHz and 6.3MHz filters for PBT to
work best and 9MHz would be closer to the mixer so they would be
preferred first).
<http://tentecwiki.org/doku.php?id=562>
73 Kevin N7WIM
On Nov 26, 2007, at 11:55 AM, Tony Berg wrote:
> Gary,
>
> According to a "Ten-Tec Instruction Sheet for Models 282, 285 and 288
> Crystal Filters," they are designed for use in the Omni V, Paragon,
> Corsair and Corsair II transceivers. These are for the 6.3 Mhz IF. Per
> another instruction sheet, the 217 and 219 that you mentioned are for
> the Omni V (and other listed units, but not the Corsair II) 9 MHz IF.
>
> 73,
> Tony W1OT
>
> On 11/26/07, Gary Smith <Gary at doctorgary.net> wrote:
>> Looks like my Corsair II is going to be my backup rig. I'm getting
>> ahold of my father's Omni V which has been mothballed for years.
>>
>> I have a couple questions in light of this;
>>
>> Looking at the old brochures, I see the CW crystal filters are
>> different numbers between the Corsair II & the V, are they
>> interchangeable though?
>>
>> I have the model 285 500Hz & the model 282 250Hz filters (no 288 SSB
>> filter) and see the V calls for model 217 for 500Hz & a 219 for 250Hz
>>
>> If the Corsair filters can be placed successfully in the Omni, that
>> would sure be nice.
>>
>> Thanks,
>>
>> Gary
>> ka1j
--
73 DE N7WIM / G8UDP
Kevin Purcell
kevinpurcell at pobox.com
More information about the TenTec
mailing list