[TenTec] PSK 31 with the Orion II

[Rsoifer at aol.com]

I don't know the Rascal interface box but I am running PSK31 on my Orion II  
using the US Interface Navigator.  I have the O II AUX gain set all the way  
up at 100 and control the audio input level with the Navigator.  If the  Rascal 
does not have such a facility then you can control it at the  computer.
 
73 Ray W2RS
 
 
In a message dated 12/27/2008 4:03:24 P.M. GMT Standard Time,  
W3ETC at thecumminsgroup.com writes:

Hello  all:

I am trying to get my Orion II running 2.039D to run PSK 31 using  Digipan
and WinPsk.  I seem to be having a bit of difficulty with the  Orion
settings.  I am using a Buxcom Rascal box with a straight thru  Din cable and
I can receive and decode fine on the laptop.  I can  transmit on the Orion,
and can hear it on an external receiver transmitting  PSK 31 but there does
not appear to be much if any drive to the  transmitter.  The transmit light
on the Orion does not light and the  meter does not move.   My external tuner
(LDG Z 11 Pro) also does  not light either as it does in SSB mode.

I have the Orion using the aux  mode as the input with the gain up to 60.
The CW selection is set to MOX  and the TX EQ is 0.00 db.

Any suggestions as to drive settings on the  Orion II would be most
appreciated ?

73s

Ed  W3ETC   

_______________________________________________
TenTec  mailing  list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


**************One site keeps you connected to all your email: AOL Mail, 
Gmail, and Yahoo Mail. Try it now. 
(http://www.aol.com/?optin=new-dp&icid=aolcom40vanity&ncid=emlcntaolcom00000025)