[TenTec] Omni VI Keyer

[Ken Brown]

Hi Peter,

Thanks for the information. It does work on my Omni VI version 3. I 
usually use a Logikey K-3, so seldom make any adjustments to the 
internal keyer. Nice to know about this feature though.

DE N6KB
> Assuming that the Option III is very similar to the Plus, press the st button in the upper right hand corner of the front panel.  Then press the cw button.  when both are depressed the upper right part of the dial, to the right of the frequency readout, will show the internal keyer speed.  Below that is what I call weight, with 1.00 being "normal" and something above that being progressively "heavier."
>
>   
>