[TenTec] 95% Shield

[Ken Brown]

> One more point, any well designed broadcast or commercial transmitter 
> installation is going to include some type of output filtering in the 
> transmission line, or at least some form of interference reduction device. 
> whether it be a filter,isolator or whatever. It is just good engineering 
> practice. 
>
Too bad not all installations use good engineering practice. In my 
experience paging system transmitters we're the most likely ones to not 
use isolators or filter cavities. I guess the reason is that they don't 
need to receive, at least not at any frequency their spurs bother, so 
they don't care to spend the money or lose a few tenths of a dB in TX 
signal strength for the benefit of their neighbors on the same mountain 
who do have sensitive receivers.

DE N6KB