[TenTec] RX366, v3 firmware

[John Henry]

Hi Pat,

The RX366 is a replacement for the existing sub-rx, giving more
features/functions/better receiver specs, making the main and sub at the
same performance level now. Along with a built in sub-rx preamp and
attenuator and slots for 3 roofing filters for the sub-rx.

Whereas it doesn't provide line level outputs for listening or computer
interfacing, it does have a 9MHz IF output connector on it in case someone
wanted to run a panadapter from their sub-receiver.

John Henry



On Mon, Jan 30, 2012 at 5:10 PM, Pat Patterson <ppattrsn at swbell.net
<http://lists.contesting.com/mailman/listinfo/tentec>> wrote:
>* Barry,*>* With the RX366 update to the OII is it possible to get simultaneous line level*>* output from both the Main and Sub RX?  The connectors are there on the OII but*>* the internal audio path isn't complete.*>* Thanks,*>* Pat, W5VY*