[TenTec] [Ten-Tec-Omni-VII] Tentec Hamfest

[Bob McGraw - K4TAX]

Thanks John.  I look forward to recalling the "face behind the mike" on the Sunday Tentec nets, now having met you personally.

I do appreciate the kind, generous words and complements.  I do fondly recall the hams that helped me along the way.   It is my endeavor and I hope I can pass along equal assistance to others as was passed along to me.  All of those fellows are now SK:   James - K4EWI, Harry - W4FLW, Jimmy - K4MVE, Joe - W5NTS, Jim - W4LOJ & Noel - K4QAT just to mention a few.  Perhaps some of you worked them along the way.

I hope to see each of you again next year, at still a bigger and better Tentec Hamfest.  

73
Bob, K4TAX


  ----- Original Message ----- 
  From: John Occhipinti 
  To: Ten-Tec-Omni-VII at yahoogroups.com ; TenTec_Eagle at yahoogroups.com ; Discussion of Ten-Tec Equipment 
  Sent: Tuesday, October 02, 2012 6:25 PM
  Subject: Re: [Ten-Tec-Omni-VII] Tentec Hamfest


    
  Hello again Bob, it was so nice to finally meet you in person at the TEN-TEC Hamfest. Thank you for spending a great deal of time with me, helping me to get acquainted with a lot of the TEN-TEC management and staff.

  Your tireless work and energy is deeply appreciated by so many of our fellow TEN-TEC operators. You hold the distinction of not only being a TEN-TEC Ambassador, but you are truly the personification of the ultimate Ambassador for Amateur Radio.

  Keep up the good work and thanks again for all you do for our great hobby.

  Brother John, K3UR

  http://www.qrz.com/db/k3ur
  John D. Occhipinti, K3UR
  Net Control, TEN-TEC SSB Net
  http://k3ur.com
  The Voice of Atlanta

  ----- Original Message ----- 
  From: Bob McGraw - K4TAX 
  To: Ten-Tec-Omni-VII at yahoogroups.com ; TenTec_Eagle at yahoogroups.com ; Discussion of Ten-Tec Equipment 
  Sent: Tuesday, October 02, 2012 7:24 AM
  Subject: [Ten-Tec-Omni-VII] Tentec Hamfest

  To all that I spoke to and with and had the opportunity to demonstrate the Eagle or the Omni VII, thanks for the opportunity to do so. Hopefully, I was able to share some of my experiences and ideas with you as well as information on the two products. I perceive the turn-out was better than last year, specially in the flea market area although the brief showers did "dampen" those participating and attending and made for an early departure for many. The traffic through the tents produced crowded conditions most of the time. Hopefully you did persist and get your hands on a operating Tentec product.

  It is always good to see faces where before I only associated with various posts on the Reflectors and by e-mails. And in that light, thanks to those that moderate and maintain the Reflectors. They serve as a good meeting place for exchanging ideas and resolving issues.

  My role with Tentec is strictly voluntary as a beta test person for the Firmware used with the Omni VII and Eagle and I have each one at my home QTH. I am a Tentec Ambassador. If you decided to purchase a radio then or in the future, do mention such to Stan or Stuart and that I might have assisted you in your decision.

  Until next year, the very best to each of you. I look forward to many e-mails and messages until then.

  73
  Bob, K4TAX

  [Non-text portions of this message have been removed]

  [Non-text portions of this message have been removed]



  __._,_.___Reply via web post  Reply to sender  Reply to group  Start a New Topic  Messages in this topic (2)  

  Recent Activity: a.. New Members 2 
  Visit Your Group 
  To visit your group on the web, go to:
  http://groups.yahoo.com/group/Ten-Tec-Omni-VII/


   Switch to: Text-Only, Daily Digest . Unsubscribe . Terms of Use . Send us Feedback .
   
  __,_._,___