[TenTec] DIY VFO jumper for Omni B

[GARY HUBER]

The jumper needs to be short, maybe a three inch piece of insulated #14 
formed to a U with phono plugs soldered on. It sounds like the transmit or 
receive offset switch is on.  The other thing to consider is the accessories 
molex connector should have a plug with a jumper from the + regulated line 
to PTO enable.


73 & DX,
Gary - AB9M

-----Original Message----- 
From: Neil Martinsen-Burrell
Sent: Monday, April 07, 2014 8:03 PM
To: Discussion of Ten-Tec Equipment
Subject: [TenTec] DIY VFO jumper for Omni B

Can anyone tell me what the external VFO jumper for an OMNI B should look
like?  When I bought the rig, it came with the external VFO which I no
longer have.  Now to make the rig work, I think I need to replace this
jumper.  I have tried just using a RCA cable that I had around the shack,
but when I transmit, the displayed frequency jumps around wildly, so I
don't think that is right.

I have some RCA connectors and some wire, but I don't know what exactly I
am trying to make.  Can someone offer a description or a picture of what
the original external VFO jumper looked like so I can attempt to duplicate
it?  Or failing that, can someone explain why my simple RCA cable doesn't
work?

Thanks for any help you can offer.

-Neil KD0UKC
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec