[TenTec] din connector, etc.

[Carl Moreschi]

A lot of the newer radios are now looking good in this respect also. 
The Yaesu FT3000 and FT5000, Elecraft K2 and K3, Flex 6000 series, are 
all good on this now.

Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com

On 9/25/2014 1:04 AM, Ken Brown wrote:
> "The dit starts 17mS later and completes 17mS later. The first dit is
> sent in its full length and the op on the other end never even hears the
> difference."
>
> That is good to hear. Ten-Tec seems to be the only radio company that
> understands this. (Correct me if I'm wrong. I hope I'm wrong.)
>
> Almost every radio review I see in QST shows shortened first dits even
> if they do get the following elements right. Some rigs have a delay on
> the beginning of the dits and dahs, so amplifiers have time to switch,
> but fail to add a delay to the end to restore the proper timing of the
> elements.
>
> DE N6KB
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>