[TenTec] Corsair transmit

[Bob McGraw K4TAX]

Is there a jumper for external VFO on the back?    I don't recall. Won't work without it in place. 

Bob, K4TAX


Sent from my iPhone

> On Nov 8, 2019, at 9:22 PM, Mark Hoffman <markahoffman at gmail.com> wrote:
> 
> After several months in storage and a move across country, I pulled my
> Corsair out of its box and anxiously hooked it up - 238 tuner, Ten Tec
> power supply, swr meter - all terminating into a trusted dummy load.  Using
> a receiver test oscillator, the receiver does not seem to be working
> either, also zero output from transmitter.  I confirmed that the p/s is OK
> by swapping out with a Astron p/s - same thing and measured voltages.
> Before I dig into this trusted unit of 20+ years, are there some moderate
> to simple things to check?
> Thanks,
> Mark
> W7GCY
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>