Topband: KT34 & Shunt Feeding

[Earl W Cunningham]

Greg, W7MY wrote:

"You can strap all of the elements directly to the boom with no effect on
the KT-34xa; I had the same set-up a few QTH's back."
==========
Be prepared to retune your 160-meter shunt feed system (mainly the height
of the shunt wire tap) because this will increase the top loading of the
tower quite a lot, making the shunt feed parameters significantly
different.

Your 160-meter signal will probably benefit because of the increased top
loading.

73, de Earl, K6SE