Topband: Spiderbeam mast UV Resistance?

[Mike Cizek]

The shiny black coating on the Spiderbeam masts is a UV resistant paint.
The masts are designed to be used outdoors, and W4PA (who sells them here in
the states) says that folks have been using them outdoors for ten years or
more.  I'm sure he can give you more info.  

73,
 
Mike Cizek W3MC

 
-----Original Message-----
From: Topband [mailto:topband-bounces at contesting.com] On Behalf Of Lup
Schlueter
Sent: Thursday, 29 August, 2013 12:18
To: topband at contesting.com
Subject: Re: Topband: Spiderbeam mast UV Resistance?

Am 29.08.2013 12:14, schrieb Jim Garland:
> My 26m Spiderbeam mast is made of a shiny black fiberglass material. Have
> users of this or the shorter Spiderbeam masts had experience with how well
> the masts hold up to UV radiation? My QTH is at 7000 ft elevation and the
> sun shines 330 days/year, so UV degradation is a big problem.  I've used
> Krylon UV-resistant spray on my SteppIR yagi and it didn't seem to help at
> all. I've heard that a water-based urethane paint works well, but don't
know
> if it would bond to the Spiderbeam mast. Also, the top of the mast is very
> flexible and thin, so the weight of the paint might also be a problem. Any
> suggestions?
>
> 73,
>
> Jim W8ZR
>
> _________________
> Topband Reflector
>
Why not ask the "spidermann" himself?

mailto: corneliuspaul at gmx.net

the reflector for spiderbeam products is :

http://groups.yahoo.com/group/spiderbeam/

73 + 55  Lup DJ7SW
_________________
Topband Reflector