Topband: Bev-Flex 4 Beverage system

[Herbert Schoenbohm]

I have heard that a 450 ohm ladder Beverage can be fed in the center or
even off center.  This is something I would like to do but have never seen
any write up on the way it is done.  I presume ti would require a
reflection transformer and ground on each end.  But the means of feed the
wires at the center or off center has be puzzled.  Anyone who has done this
with a two wire reversible....please lewt me know.

On 4/14/2017 9:58 AM, Alan Swinger wrote:

I checked out the JK Antenna web site and the system looks good and
sounds like it performs well. Have there been any side-by-side
comparisons w/ a standard 2 wire 450 ohm Beverage?
Tks - Alan K9MBQ

-----Original Message-----

From: Ned Mountain <ned.mountain at mindspring.com> <ned.mountain at mindspring.com>
Sent: Apr 13, 2017 7:35 PM
To: topband at contesting.com
Subject: Topband: Bev-Flex 4 Beverage system

I have already received several e mails since my posting.  The data sheets
and specs are on the JK antenna website.  (jkantennas..com)



Here is a link to a video presentation I did some time back to one of the
local clubs regarding the system.


https://www.youtube.com/watch?v=HZiQXihUvIo<https://www.youtube.com/watch?v=HZiQXihUvIo&feature=youtu.be>
<https://www.youtube.com/watch?v=HZiQXihUvIo&feature=youtu.be>
&feature=youtu.be



Ned

WC4X


Can you explain how do hook up a two wire ladder line Beverage with a
center feed?

Thanks, Herb, KV4FZ

Ned Mountain
ned.mountain at mindspring.com
770 823 4205 <(770)%20823-4205> (M)



_________________
Topband Reflector Archives - http://www.contesting.com/_topband

_________________
Topband Reflector Archives - http://www.contesting.com/_topband