[TowerTalk] Tailtwister Problem
Barry Kutner
w2up@mindspring.com
Wed, 12 Apr 2000 14:03:10 -0400
I bought a few from Norm's Rotor Service a year or so ago. His
weere only slightly larger than the original and fit in the box fine.
73 Barry
On 12 Apr 00, at 10:29, k6ll@juno.com wrote:
>
>
>
> On Wed, 12 Apr 2000 10:58:21 EDT TNeill1648@aol.com writes:
> >
> > My Tailtwister rotator works very well except for a few degrees on
> > the compass rose in which it always stops and refuses to turn. On
> > any heading between 60 degrees thru 100 degrees the rotator will not
> > turn. No amount of rocking will get it out of that mode. When the
> > wind blows sufficiently to assist in moving it out of the 60 to 100
> > degree range, it turns just fine.
> >
> > It appears I am going to have to remove the rotor. Anyone with a
> > similar experience as to what may be causing the trouble? Thank
> > you. Tom K4XG
>
> I would suggest changing the phase shift capacitor in the control box
> before climbing the tower. You can get one at your local electric
> motor shop for about $4. Mine is labeled 124 - 149 microfarads at 125
> volts A.C. It's a lot bigger, so you'll have to kluge it in.
>
> When these capacitors start to fail, it shows up as low torque in the
> motor. This may or may not be your problem, but for four bucks, what
> the hey!
>
> Dave Hachadorian, K6LL
> Yuma, AZ
> K6LL@juno.com
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com Administrative
> requests: towertalk-REQUEST@contesting.com Problems:
> owner-towertalk@contesting.com Search:
> http://www.contesting.com/km9p/search.htm
>
--
Barry Kutner, W2UP Internet: w2up@mindspring.com
Newtown, PA FRC alternate: barry@w2up.wells.com
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm