[TowerTalk] Cutting 3/16" Stainless Steel Guy Cable
SavageBR@aol.com
SavageBR@aol.com
Wed, 19 Jul 2000 15:08:37 EDT
I use a high speed Dremel tool and a one inch cut off wheel. It will cut it
off clean, easy and without sharp edges. Be sure to wear eye protection. If
you have lots of cable to cut, more than one towers worth, then you may want
a more substantial tool. I have been using the Dremel tool for years with
very good success.
Bruce AA4Z
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com