[TowerTalk] Cutting Guy Cable

[dan hearn]

I use a small hand held right angle grinder with an abrasive cut
off wheel. Mine is a Makita and the wheels are very inexpensive. I also
use mine to cut angle and pipe. I had a prop pitch motor with angle legs
welded to the flange and was able to cut the welds without damaging the
PP motor. It cuts very rapidly. Wouldn't be without mine. 
73, Dan, N5AR

--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com