[TowerTalk] Tram question

[John L. Hammers]

Maybe the method I used is TOO SIMPLE...
I attached a "slip on pulley" over the
top of the mast which was above the tower.
Mounted a 1500# pull 12 volt winch at the 
bottom of the tower and ran 1/4 SS cable
from the winch thru the top pulley and back
down to the antenna  (a 200# + antenna)
that worked great for me as I had to raise
and lower THAT antenna several times before
returning it for warranty work. see this 
url for details.
http://users.bentonrea.com/~wa7aw/tower/page14.html



* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* Pursuant to US Code, Title 47, Chapter 5, Subchapter II, '227,  *
* any and all unsolicited COMMERCIAL E-mail sent to this address  *
* is subject to a download and archival fee in the amount of $500 *
* US.  E-mailing denotes acceptance of these terms                *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *


--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com