[TowerTalk] House Entry
Stephanie WX3K
Stephanie WX3K" <wx3k@ptd.net
Thu, 3 May 2001 00:58:51 -0400
I used 1/4 aluminum plate. It is easier to drill holes in when installing
bulkhead connectors. You can check the appearance under the feedline link.
http://www.wxpage.com/tower2000.htm
Stephanie R. Koles WX3K
wx3k@arrl.net
http://www.wxpage.com
Mt. Holly Skywarn Technical Committee - Vice Chair
Skywarn Coordinator for Somerset County, NJ
Mt Holly Skywarn Webmaster
Eastern PA Radio Assoc. - Vice President
----- Original Message -----
From: "WA9ALS - John" <wa9als@starband.net>
To: <towertalk@contesting.com>
Sent: Sunday, April 29, 2001 10:45 PM
Subject: Re: [TowerTalk] House Entry
> > Okay, I give up. Where can I find 1/8" copper plate, and how much is it
> > going to cost?
>
> Try http://www.mcmaster.com
> then search for "copper sheet" They have copper plate too, but it starts
at
> 1/4 inch.
>
> Everything and more than you wanted to know. 12x12 inch 0.187 in thick
> copper alloy 110 is $43.80. 0.062 in is $18, and 0.016 is $10.86. You
can
> order as small a quantity as you like on many things, and they ship out
> right away - nicely packaged too! They also have a lot of info about
their
> stuff available on the web site! Good place to get stainles steel sheets
> too to make shims etc.
>
>
> List Sponsor: ChampionRadio.com - Trylon self-supporting towers,
> safety equipment, rigging gear, LOOS tension guages & more!
> http://www.championradio.com
>
> -----
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
>
>
List Sponsor: ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com