[TowerTalk] Rotator Control Bulbs

Stan or Patricia Griffiths w7ni@easystreet.com
Wed, 02 May 2001 23:06:13 -0700


The Ham-M, Ham II, and Ham III used brown (sometimes black)
plastic boxes for housing the control unit, I believe.  I
any case, I have one of those cases  with a couple of melted
places where the bulbs are.  Now I suspect that some of the
higher powered bulbs were installed and heated the case to
the melting point . . . something to consider when choosing
replacement bulbs.

I just happened to remember that I had modified those
control units to indicate direction all of the time so those
bulbs were lit 100% of the time.

Stan
w7ni@easystreet.com




List Sponsor:  ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com