[TowerTalk] Taping wires to flat member towers

[Gene Smar]

Juan:

     I used solid insulated wire, #12AWG (not sure of metric equivalent) to
wrap around my coax and control cables on my Trylon tower, which also has
flat members.  The wire can be removed and re-attached only a few times, but
here in US it is very inexpensive.

73 de
Gene Smar  AD3F

----- Original Message ----- 
From: "Juan M. Chazarra EA5RS" <ea5rs at ono.com>
To: <towertalk at contesting.com>
Sent: Wednesday, December 08, 2004 8:04 AM
Subject: [TowerTalk] Taping wires to flat member towers


> Adhesive tape tapes coax just fine to round member towers, but I am
> having a hard time taping coax, rotor cable, etc to the members of my
> tower which are all flat. Any ideas?
>
> Thanks,
> Juan EA5RS
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk