[TowerTalk] OK for Rohn 45 Tiltover - Dutton-Lainson 2500?

kd4e kd4e at verizon.net
Wed Oct 5 17:26:51 EDT 2005


> Per the drawings, the standard Rohn 45G foldover winch is indeed a 
> Dutton Lainson B2503 brake winch.  That's a 2500 lb winch with a 12:1 
> gear ratio and a 3 1/8" drum hub.
> 
> Unfortunately they are very hard to find.
> 
> The 300 lb pull is the minimum static cable load recommended by Dutton 
> Lainson to ensure proper operation of the brake.  At the handle, it's no 
> big deal.
> 
> regards, Mahlon - K4OQ

Just tried a buch of searches and did not find the
Dutton Lainson B2503 brake winch.

Is it fair to say that this is an equal or better replacement?

FULTON K2550
http://www.fultonperformance.com/products.php?group=77&subgroup=80

I'd prefer something that could also be run from a
1/2 drill or the like but simple and reliable, if
only manual, is better than something more prone
to mechanical failure.

If possible it would be good to be able to detach
and dry-store the winch, when not in use, to prevent
problems from exposure to wind, rain, blowing sand,
critters, etc.

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Thanks! & 73, doc kd4e

            |_|___|_|
            | | & | |
               {|
       /\      {|
      /  \     {|
     /    \    {|
    /   @  \   {|
    |   |~_|~~~~|
    |   -| |    |
============\ #   http://bibleseven.com/kd4e.html
      KD4E     =========================================
West Central Florida

      /\ /\
?(~~~{ @ @ }  Sent from
  (      *     Puppy Linux  http://www.goosee.com/puppy
  (        )
   ~~~~~~~~~
   / /   / /
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


More information about the TowerTalk mailing list