[TowerTalk] Problem with a Yaesu rotator

[Win]

Magnus, this usually occurs when one of the pins backs out of the molex 
connector on the rear of the control unit. If this is not the case, there 
may be a break in one of the wires near the connector. The connector at the 
rotor is extremely well made, and the problem seldom occurs there.

Win, w0lz


----- Original Message ----- 
From: "Magnus A" <sm6wet at telia.com>
To: <towertalk at contesting.com>
Sent: Sunday, October 30, 2005 10:36 AM
Subject: [TowerTalk] Problem with a Yaesu rotator


> Things always go bad in contests dont they.
>
> I have a Yaesu G-450XL rotator that is "half dead".
>
> What happens is that the rotator will move left-turn but not right turn.
>
> I checked both ends of the cable but cant find any faults.
>
> Anybody know what this can be?
>
> This might give a clue:
> Using a amplifier the overlap light used to flicker at times in the 
> rotator control box, it does not do this anymore.
> Could it be so that HF did something wrong to my control box and if so, 
> what and how do I fix it?
>
> 73 de Magnus SM6WET
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 267.12.5 - Release Date: 10/24/2005
>
>