[TowerTalk] Minimum Rotor cable for 250 ft run

[Joe Giacobello]

I crossed this bridge before and the easy, but expensive, way out is to 
use the Wireman's (or equivalent) #304 where 2-#14, 6-#18 are 
recommended for runs up to 325 feet.  However, others suggested using 
Romex #14 for the motor terminals (1 and 2 on the T2X) and an 
inexpensive 6 -#18 conductor cable for the other terminals.  The latter 
is certainly the inexpensive way out.

73, Joe

Allen R. Brier wrote:
> What is the minimum rotor control cable size for a 250 ft run to a
> Tailtwister?
>
>  
>
> Allen Ross Brier, N5XZ SET
>
> BriTech Systems Incorporated
>
> NICET Fire Alarm Level IV
>
> NICET Sp. Hazards / Sprinkler Systems Level I
>
> 1515 Windloch Lane
>
> Richmond, Texas 77469-2553
>
> (281) 342-1590
>
> (281) 342-0940 (FAX)
>
> (713) 705-4801 (Cell)
>
>  
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>