[TowerTalk] Wanted: KLM Insulator for 2M Yagi 144-148-13LB or theLike

[Roger (K8RI)]

> I'm trying resurrect an old KLM Yagi and need one insulator for a
> director element.  These are T-shaped and have a groove to fit along the
> 1-1/2" boom and a 3/8" hole through which the element passes.  I can

You may find the design of these has changed a bit.  The last ones I 
purchased had a grove for the element so the element fitted on top in the 
same manner as the insulator fits on the boom. Even though they use 
insulators mine ground the reflector and directors to the boom with the 
mounting screw. Only the 4 driven elements are insulated from the boom on my 
14 L KLMs
Sadtip has already given a link to a possible source.

Good Luck,

Roger (K8RI)

> fabricate an alternate arrangement, but would prefer to use one of the
> original insulators if someone has one available.
>
> Thanks.
>
> 73, Joe
> K2XX
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk