[TowerTalk] rotor control cable and the bulkhead....?

[Alfred Frugoli]

Chas,

K5FD also makes a 12 line surge suppressor that is also fused and has
filters for RFI.

http://k5fd.com/surge.html

After the surge suppressor, the lines could simply come through a grommet in
the bulkhead.

Good luck.

73 de Al, KE1FO

-----
Visit my amateur radio contesting blog at ke1fo.wordpress.com.

On Mon, Jul 7, 2008 at 3:52 PM, <chasm at texas.net> wrote:

> A Question...
>
> how does one take the 7 or 8 wire cable thru a bulkhead and into the
> station?  I cannot see how a lightning strike hitting the mast or the
> yagi or beam or ??? on that mast is not going to travel down to ground
> using the tower, the coax, and the control cable.  I use an antenna
> switch box mounted on my Rohn with a piece of coax going thru the
> bulkhead thru the usual grounding connectors.  but cannot figure out
> how to ground the rotor control cable before it enters the shack.
>
> thanks
> 73 de chas/k5dam
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>