[TowerTalk] MRF Mast raising fixture, US towers

Mike, K6BR noddy1211 at sbcglobal.net
Sat Jan 10 14:07:34 EST 2009


Thank you Alan, if only we had a catalog, could not find one on the US
towers web site.  Yes the third hole, answers the question thank you very
much for the information.

Mike, K6BR

-----Original Message-----
From: Alan NV8A [mailto:nv8a at att.net] 

Subject: Re: [TowerTalk] MRF Mast raising fixture, US towers

On 01/10/09 01:34 pm Mike, K6BR wrote:

> A friend has just received an MRF (mast raising fixture) from US Towers.
> The question is how does it operate. There are no diagrams or manual as
> usual from US Towers.
>
> I assume that the fixture bolts to the two holes on the top plate of the
> tower, is the cable supposed to go though the same hole as the mast?
>
> If so this would mean that the mast and thrust bearing would have to be
> removed so that the cable and cleat could pass through the mast hole and
> would stop the use of a thrust bearing, I can't believe this would be
true.
>
> Any help with an explanation or photos would be very much appreciated.

I've never used or even set eyes on an actual MRF, but I just looked at 
the picture in the catalog (p. 7 of mine). This seems to show the cable 
passing through a hole located between the winch assembly and the mast hole.

73

Alan NV8A

No virus found in this incoming message.
Checked by AVG - http://www.avg.com 
Version: 8.0.176 / Virus Database: 270.10.5/1885 - Release Date: 1/9/2009
7:59 PM



More information about the TowerTalk mailing list