[TowerTalk] Universal Tower questions

[John Kemker]

Okay, so what's the formula to determine the adjusted wind load?  Is it 
straight multiply the wind load of the antenna by the height, in feet, 
above the tower?


Roger (K8RI) wrote:
> John Kemker wrote:
>   
>> All I'm planning on putting up on the tower is a Mosley CL-33 and a 
>> W5WVO-modified Cushcraft A5-50 on top of a 15 ft. 2" dia. mast, turned 
>>   
>>     
> Don't forget to multiply the wind load of the A5-50 by the height above 
> the tower.
>
> 73
>
> Roger (K8RI)
>   
>> by a Yaesu G1000SDX.  Single run of LD5-50F out to tower with a coax 
>> switch up near the top to switch between the two beams.  I *might* top 
>> it off with a 10m vertical, but then again, might just put that 
>> somewhere else, like on the house.
>>
>>   
>>     


-- 
--JohnK
73 de W5NNH
10X 75371/M&M 117/SMIRK 6185/Six Club 285/TRA 2499/Norcross 228 F&AM




---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 090721-0, 07/21/2009
Tested on: 7/22/2009 2:28:50 AM
avast! - copyright (c) 1988-2009 ALWIL Software.
http://www.avast.com