[TowerTalk] fall arrestor
Jim CASSIDY
jc_ki7y at q.com
Wed Sep 16 12:20:27 PDT 2009
In training from my employer the fall arrest connection was always on the back, and the fall arrest gear we were issued only had the back D ring.
Also that is supported by information in a book available from ARRL about tower climbing safety.
A couple of important factors with the fall arrest system is that the fall arrest strap should be a type that slows the fall instead of a solid strap. Also hanging after the fall can be fatal if not rescued in a short time span.
73
Jim Cassidy
KI7Y
> Date: Wed, 16 Sep 2009 10:51:59 -0700
> From: k6ufo at arrl.net
> To: towertalk at contesting.com
> CC: petesias at yahoo.com
> Subject: Re: [TowerTalk] fall arrestor
>
> On my AN Wireless, the cable is about 4 inches out from the leg,
> but since the one-way SALA ascender clips to a 6 ft fall
> arrest lanyard that goes around to a D-ring point on the BACK of the
> climber, that distance isn't critical. Just enough to keep it from rubbing
> on the tower. Mark K6UFO
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
More information about the TowerTalk
mailing list