[TowerTalk] Where should the nuts go?

[K7LXC at aol.com]

In a message dated 4/13/2010 10:20:10 A.M. Pacific Daylight Time,  
towertalk-request at contesting.com writes:

>  Just putting up a new TX455. The base plate comes with 3  nuts on each 
long
bolt embedded in the concrete. Question is: Do 2 nut  belong below the
baseplate for locking the level, and one nut above the  plate, or the other
way around with one nut below and 2 nuts  above?
 
    The weight of the tower will keep the bottom nuts  from going anywhere. 
You double nut the top of the bolts to make sure they  won't go anywhere 
either. 
 
Cheers,
Steve    K7LXC
TOWER TECH
UST Factory authorized installer