[TowerTalk] OR2800 rotor cable

[Jim Brown]

On Thu, 22 Apr 2010 10:49:59 -0400, Les Kalmus wrote:

>These pulses are a notorious source of noise when the rotator is in motion.
>M2 recommends shielded cable, i.e. RG-58 to suppress that noise.

Interesting. That's very different from shielded twisted pair. Question: Is 
the circuit ground-referenced? If so, RG58 is probably the best solution. If 
it's balanced, a good twisted pair should work as well. 

73,

Jim K9YC