[TowerTalk] Using Ring Rotors on crank up towers

[Jim Thomson]

Date: Tue, 7 Dec 2010 07:53:43 -0600
From: "Mike & Becca Krzystyniak" <k9mk at flash.net>
Subject: [TowerTalk] Using Ring Rotors on crank up towers

   I was wondering is anyone is using ring rotors on one of the larger crank
up towers to stack yagi's (along with a rotor on top)?

Thanks in advance.

Mike K9MK

##  done all the time. Contact  Carl  at Tic-gen.  He has pix of this.  He uses the same
brackets that hold up the big 'Que'  rack, but with a twist.   Instead of the normal flat
plates and U bolts that would attach to a say rohn 45 tower leg, he instead  uses these
long, solid cylinders welded to the plates.    The  solid cylinders   simply   drop inside 
the top of the tower legs  for what ever section you want to mount the  Tic ring at. 

##  On a HDX-689,  [ 6 x section, 89' tower] the  Tic  1032  will  mount at both the
72' level and also the 55' level. 

Later.... Jim   VE7RF